– In the same way, fix the cross rod to the other side of the vehicle,
A
mount
.
C
– Fold the stowage compartment cover downwards.
Rolling up
– Fold down the stowage compartment cover behind the rear seats
⇒ fig.
86.
– Pull the cross rod back slightly, first on the one side then on the other
side and take the cross rod out of the mount
– Hold the cross rod in such a way that the net partition can roll up
slowily and without damage into housing
– Fold the stowage compartment cover downwards.
If you wish to use the entire luggage compartment, you can remove the luggage
⇒ page 81, fig.
compartment cover
WARNING
•
First check for yourself that the cross road is inserted into the mounts
in the front position!
•
Pay attention that the rear seat backrest is correctly interlocked. It is only
then that the three-point seat belt for the middle seat can reliably fulfil its
function.
Using the system
Safety
A
⇒ fig.
87.
C
A
.
B
84.
Driving Tips
Use behind the front seats
Unrolling
– Fold the rear seats forwards ⇒ page 73
– Pull the net partiton net at the plate
A
⇒ fig.
88.
C
– Insert the cross rod into the mount
the cross rod forward.
– In the same way, fix the cross rod to the other side of the vehicle,
A
mount
.
C
Rolling up
– Pull the cross rod back slightly, first on the one side then on the other
side and take the cross rod out of the mount
– Hold the cross rod in such a way that the net partition can roll up
slowily and without damage into housing
– Fold the rear seats back into its original position.
General Maintenance
Seats and Stowage
Fig. 88 Unrolling net
partition
A
out of the housing
A
A
first on the one side and push
C
A
⇒ fig.
C
A
.
B
Breakdown assistance
Technical Data
83
A
B
88.