Skoda Octavia COMBI 2007 Owner's Manual page 237

236 Breakdown assistance
Wheel trim caps*
Pulling off
– Carefully remove the wheel trim cap using the removal hook
⇒ fig.
213.
Slackening and tightening wheel bolts
Slacken the wheel bolts before jacking up the vehicle.
Slackening wheel bolts
– Insert the wheel wrench fully onto the wheel bolt
– Grasp the end of the wrench and turn the bolt about one turn to the
Tightening wheel bolts
– Insert the wheel wrench fully onto the wheel bolt
– Grasp the end of the wrench and turn the bolt to the right until it is
Fig. 213 Pulling off
wheel trim cap on light
alloy wheels
Slacken the wheel bolts only a little (about one turn) as long as the vehicle
has not yet been jacked up - risk of an accident!.
apply pressure carefully with your foot to the end of the wheel wrench if it proves
difficult to slacken the wheel bolts. Hold tight on the vehicle when doing this and
ensure that you have a steady position.
Fig. 214 Changing a
wheel: Slackening wheel
bolts
11)
⇒ fig.
left 214.
tight.
WARNING
Note
Use the appropriate adapter for slackening and tightening the safety wheel bolts
⇒ page 237.
11)
.
11)
.