104
Heating and air conditioning system
Note
•
We recommend that you do not smoke in the vehicle when the recirculating air
mode is operating since the smoke which is drawn at the evaporator from the inte-
rior of the vehicle forms deposits in the evaporator of the air conditioning system.
This produces a permanent odour when the air conditioning system is operating
which can only be eliminated through considerable effort and expense (replace-
ment of compressor).
Using the system
Fig. 122 Climatic: Controls
Setting temperature
A
⇒ fig. 122
– Turn the control dial
A
temperature.
A
– Turn the control dial
A
ture.
to the right in order to increase the
to the left in order to increase the tempera-
Controlling blower
A
– Turn the blower switch
into one of the positions, 1 to 4, in order to
B
switch the blower on.
A
– Turn the blower switch
into position 0 in order to switch the blower
B
off.
A
– Pressing button
- causes the recirculating air system
3
⇒ page 106 to be switched on.
Control for air distribution
– You can adjust the direction of the inlet air flow ⇒ page 107 using air
A
distribution regulator
.
C
Switching cooling on and off
A
⇒ fig.
– Press the button
AC
1
button.
– When you again press the switch
off. The warning light in the button goes out.
Rear window heater
A
. Further information ⇒ page 59.
– Press button
2
Auxiliary heating (auxiliary heating)
A
– Press the button
in order to directly switch on/off the auxiliary
4
heating (auxiliary heating and ventilation. Further information
⇒ page 113, "Auxiliary heating system (auxiliary heating and ventila-
tion)*".
The set temperature will be automatically maintained other than when the
control dial is on the extreme right or extreme left position:
•
Extreme right position - full heating.
•
Extreme left position - full cooling.
•
The blower should aways be on to prevent the windows from misting up.
122. The warning light lights up in the
, the cooling system is switched
AC