Skoda Octavia COMBI 2007 Owner's Manual page 253

252 Fuses and light bulbs
Removing the light bulb for the main beam light
– Switch the ignition and all lights off.
– Remove the headlight ⇒ page 249.
– Remove the protective cover at the rear of the headlight
fig. 232.
A ⇒ page 251, fig.
– Unplug plug
A
A
– Press the wire clamps
B
unhook them to the side.
A
– Remove the light bulb
C
that the fixing lugs of the light bulb socket fit into the recesses at the
reflector.
Installation takes place in the reverse order.
Note
We recommend that you have the headlight setting checked by a specialist garage
after installing the headlight.
Turn signal light (at the front)
⇒ page 251,
233.
in the direction of the headlight and then
and insert the new light bulb in such a way
Fig. 234 Removing the
light bulb for the turn
signal light
Changing light bulb for turn signal light (at the front)
– Switch the ignition and all lights off.
– Remove the headlight ⇒ page 249.
– Turn the socket in the direction of arrow OPEN (open) and take it out
together with the light bulb for the turn signal light
– Press the defective light bulb into the socket, turn to the left and
remove.
– Press a new light bulb into the socket and turn the light bulb to the
right as far as the stop.
– Insert the socket with the changed light bulb into the headlight and
secure it by turning in the direction of arrow CLOSE (close) to the
right.
Note
We recommend that you have the headlight setting checked by a specialist garage
after installing the headlight.
⇒ fig.
234.