Powering On The Radio; Pin Code Authentication; Unblocking Your Radio; Unlocking Your Radio - Motorola MTP8000Ex Series Feature User Manual

2.6

Powering On the Radio

Procedure:
Press and hold O
Your radio performs a self-check and registration routine.
After successful registration, your radio is in service.
NOTICE: Your radio powers on without visible and audible notification if Covert Mode is
activated.
2.7

PIN Code Authentication

If pre-set by your service provider, the radio has active PIN Code Authentication, which helps you
increase security and protect your radio against unauthorized use. The PIN code is read from the SIM
card or radio programming and cannot be changed or disabled. If you are unable to unlock the radio,
you cannot send or receive any call, nor adjust the volume level with the ROTARY KNOB.
You are asked to enter the PIN code each time you turn on the radio.
2.7.1

Unblocking Your Radio

Prerequisites: You blocked your radio by entering incorrect PIN code for three times (by default).
Procedure:
1 Radio displays Unit BlockedEnter PUK.
2 Enter 8–digit PUK (Personal Unblocking Key) number.
NOTICE: The PUK is an eight-digit master code provided by your service provider.
3 Enter the new PIN code twice.
2.8

Unlocking Your Radio

Your radio may be locked at power up. To unlock it after powering on, enter the code at the prompt.
Your radio enters the default home display.
NOTICE: The unlock code is originally set to 0000. Your service provider may change this
number before you receive your radio.
2.9

Locking/Unlocking the Keys/Buttons

Press M key and *Left N
ENU
NOTICE: The E
MERGENCY
Send Feedback
button.
N
key.
AVIGATION
button is not locked. Entering Emergency Mode unlocks all keys.
MN002041A01–AA
Chapter 2: Getting Started
45