Table of Contents
Advertisement
MN002041A01–AA
Chapter 5: Main Menu
3 Select the required network from the list.
Your radio registers to the selected network.
5.17.4
Using the Foreign Network Registration
When and where to use: Use this feature to migrate to another predefined network, when you are out
of the range of your network and your radio displays the No Service message.
Procedure:
1 From the home screen, press the
2 Select Networks → Networks Sel → Foreign Nets.
5.17.5
Using Any Network
When and where to use: Your radio has lost its home network coverage and can register to any
network. Only clear authentication is supported on any network.
Procedure:
1 From the home screen, press the
2 Select Networks → Networks Sel → Any Network.
3 Your radio selects and registers to the network automatically from the predefined list.
5.17.6
Using the Migrate To Registration
When and where to use: Use this feature to migrate to another predefined network, when you are out
of the range of your network and your radio displays the No Service message.
Procedure:
1 From the home screen, press the
2 Select Networks → Networks Sel and choose one of the following option:
•
Migrate to... — Selects the required network form the list. To view the network ID press
MENU key then press Select.
•
Auto — Your radio automatically attaches to the predefined network.
5.18
Packet Data
NOTICE: This is a selling feature.
The Packet Data (PD) Service allows you to transfer data in a TETRA system using the Internet
Protocol (IP).
NOTICE: To transfer data from a standard computer over the air, connect the computer via the
data cable PMKN4129PMLN5237 with your radio. Your service provider has to setup additional
applications on your computer.
If set up by your service provider it is possible to accelerate the transmission by using the Multi-Slot
Packet Data (MSPD) Service.
140
key.
MENU
key.
MENU
key.
MENU
Send Feedback
- Quick Links:
- List of Figures
Hide quick links:
Advertisement
Table of Contents
