Removing The Battery; Charging The Battery - Motorola MTP8000Ex Series Feature User Manual

2.2.6

Removing the Battery

IMPORTANT: The following procedure must be performed only in non-hazardous environment.
Prerequisites: Turn off the radio.
Procedure:
1 Move the latch in the direction indicated by the arrow and hold it.
2 Slide the battery toward the bottom of the radio to remove it.
2.2.7

Charging the Battery

You can charge a battery separately or attached to a radio.
Charging a battery attached to a radio can be done with the radio either turned on or off. The battery
charges faster when the radio is turned off.
IMPORTANT: Use only Motorola approved chargers which provide optimal performance. Using
other chargers invalidates the warranty, as well as may fail to fully charge, and reduces the life
of the battery.
Always charge your IMPRES battery with an IMPRES charger for optimized battery life.
IMPRES batteries charged exclusively with IMPRES chargers receive a 6-month capacity
warranty extension over the standard Motorola Premium battery warranty duration.
Prerequisites:
Do not charge the battery in a hazardous area.
IMPORTANT: Do not connect a radio without a battery to the charger.
Procedure:
1 Connect the charger to an appropriate power source (100–240 V, 12 V), according to the
specification of the charger.
2 Insert the battery or the radio with the battery attached into the appropriate socket. The LED on
the charger indicates that the charging is in progress.
Send Feedback
MN002041A01–AA
Chapter 2: Getting Started
33