Sanyo SAP-KMV91G-S Technical & Service Manual page 56

INDOOR UNIT
SAP-KMV181G
OPERATION TIMER lamp
lamp
OPERATION TIMER
*
IMPORTANT
Avoid using radio equipment such as mobile
phone near (within 1 m of) the indoor unit. Some
radio equipment may cause the unit to
malfunction.
If the trouble occurs, disconnect power and restart
the air conditioner after a few minutes.
Remote control receiver
Operation selector
ON position
OFF position
TEST and DEMO.
CAUTION
OPERATION lamp
TIMER lamp
6
Unit Display and Operation Selector
Operation selector
Remote control
receiver
This section picks up infrared signals from the remote control
unit (transmitter).
This position is for operating the air conditioner with the
wireless remote control unit.
Set the selector to this position for normal operation.
Switch the selector to the OFF position if you are not going to
use the air conditioner for a few days or longer.
The OFF position does not disconnect the power. Use the main
power switch to turn off power completely.
This position is used only when servicing the air conditioner.
position
Do not set at the TEST and DEMO. position for normal
operation.
This lamp lights when the system is in the continuous DRY or
COOL mode.
This lamp lights when the system is being controlled by the
timer.
INDOOR UNIT
SAP-KMV91G
Remote control receiver
NOTE
* This lamp lights only when
conducting service inspections.
Operation selector
OPERATION lamp
*
TIMER lamp
OI-306-06EG