HP FlexFabric 12500 Command Reference Manual page 25
Routing switch series, mpls
Hide thumbs
Also See for FlexFabric 12500:
- Configuration manual (402 pages) ,
- Network management and monitoring command reference (320 pages) ,
- Command reference manual (154 pages)
Table of Contents
Advertisement
Syntax
snmp-agent trap enable mpls
undo snmp-agent trap enable mpls
Default
SNMP notifications for MPLS are enabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command enables MPLS to generate SNMP notifications. The generated SNMP notifications are
sent to the SNMP module.
For more information about SNMP notifications, see Network Management and Monitoring
Configuration Guide.
Examples
# Enable SNMP notifications for MPLS.
<Sysname> system-view
[Sysname] snmp-agent trap enable mpls
20
Advertisement
Table of Contents
