HP FlexFabric 12500 Command Reference Manual page 129

Interface: GE3/0/3
Link ID : 1
Access Mode : VLAN
Encapsulation: untagged
Table 36 Command output
Field Description
Xconnect-group Cross-connect group name.
Connection Cross-connect name.
The field is available only when the AC is a service instance on a Layer 2 Ethernet
Service Instance
interface.
AC access mode:
•
Access Mode
•
Match criterion of the service instance. This field is displayed only when the AC type is
Encapsulation
service instance on a Layer 2 interface.
# Display brief PW forwarding information for all cross-connect groups.
<Sysname> display l2vpn forwarding pw
Total number of cross-connections: 1
Total number of PWs: 2, 2 up, 0 blocked, 0 down
Xconnect-group
vpn1
vpn1
Table 37 Command output
Field
Total number of
cross-connections
NID
State
# Display detailed PW forwarding information for all cross-connect groups.
<Sysname> display l2vpn forwarding pw verbose
Xconnect-group: vpn1
Connection: ldp
Link ID: 0
PW Type
In Label
MTU
PW Attributes
Service Instance: 4
VLAN.
Ethernet.
In/Out Label
1279/1151
1278/1151
Description
Total number of cross-connects, including those not bound with any PW.
NHLFE ID for the public tunnel that carries the PW.
If equal-cost tunnels are available, this field displays multiple NIDs.
If no tunnel is available, this field displays None.
PW state: Up, Down, Blocked, or BFD Defect.
Blocked indicates that the PW is a backup PW. BFD Defect indicates BFD has
detected a defect on the PW.
: VLAN
: 1279
: 1500
: Main
124
NID Link ID
1025 0
1027 1
PW State : Up
Out Label: 1151
State
Up
Up