Display L2Vpn Xconnect-Group - HP FlexFabric 12500 Command Reference Manual

State
Service Instance: 2
Encapsulation : s-vid 1001 to 1002 1015 to 1016
Xconnect-group: vpws2
Connection
Link ID
State
Table 44 Command output
Field
Interface
Encapsulation
Xconnect-group
Connection
Related commands
service-instance

display l2vpn xconnect-group

Use display l2vpn xconnect-group to display cross-connect group information.
Syntax
display l2vpn xconnect-group [ name group-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
name group-name: Displays information about the cross-connect group specified by its name, a
case-sensitive sting of 1 to 31 characters. If no group is specified, the command displays information
about all cross-connect groups.
verbose: Displays detailed information. Without this keyword, the command displays brief information.
Examples
# Display brief information about all cross-connect groups.
<Sysname> display l2vpn xconnect-group
Total number of cross-connections: 3, 0 up, 3 down, 0 admin down
: Up
only-tagged
: pwtopw
: 1
: Up
Description
Layer 2 Ethernet interface.
Match criteria of the service instance. If no match criteria are configured, the field is
blank.
Name of the cross-connect group bound to the service instance.
Name of the cross-connect bound to the service instance.
131