Additional Call Features; Using Autodial Transfer - Avaya 1140E User Manual

Additional call features

Contact your system administrator to determine if the following call
features are available on your IP Deskphone.
• "Using AutoDial Transfer" on page 159
• "Using the Buzz signal" on page 160
• "Using Call Page Connect to make an announcement" on page 160
• "Using Centrex/Exchange Line Switchhook Flash" on page 161
• "Charging a call or charging a forced call" on page 162
• "Using Enhanced Override" on page 165
• "Using Forced Camp-on feature" on page 166
• "Overriding a busy signal" on page 167
• "Using Privacy Release" on page 168
• "Using Radio Page" on page 168
• "Using Voice Call" on page 171

Using AutoDial Transfer

Use the AutoDial Transfer feature to transmit digits through your AutoDial
key to the Central Office after a Trunk Switchhook Flash. You must be on
a Central Office/Exchange (CO) trunk call from or to a CO that offers
Centrex or exchange line-type features.
To use AutoDial Transfer when picking up an incoming trunk call:
CentrexSHF
Autodial
1. Press the Centrex Switchhook Line
Flash key and wait for an interrupted dial
tone.
2. Press the AutoDial
number desired.
Additional call features
key to call the
159