Ricoh LD220F Operating Instructions Manual page 31

DNS Configuration
Make settings for the DNS server.
The default setting is [Auto-Obtain (DHCP)].
When you select [Specify], enter the DNS Server IPv4 address as "xxx.xxx.xxx.xxx" ("x" indicates a
number).
The default setting of DNS server 1-3 are "0.0.0.0".
DDNS Configuration
Specify the DDNS settings.
The default setting is [Active].
IPsec
Specify whether to activate or inactivate the machine's IPsec function.
The default setting is [Inactive].
Domain Name
Specify the domain name.
The default setting is [Auto-Obtain (DHCP)].
When you select [Specify], enter the domain name using up to 63 characters.
WINS Configuration
Specify the WINS server settings.
The default setting is [On].
If [On] is selected, enter the WINS Server IPv4 address as "xxx.xxx.xxx.xxx" ("x" indicates a number).
The default settings of WINS server 1-2 are "0.0.0.0".
If DHCP is in use, press [Scope ID] and then specify the scope ID.
Enter a scope ID using up to 31 characters.
Effective Protocol
Select the Protocol to use in the network.
The default setting for "IPv4" is [Active].
The default setting for "IPv6" is [Inactive].
The default setting for "NetWare" is [Inactive].
The default setting for "SMB" is [Active].
The default setting for "AppleTalk" is [Inactive].
"AppleTalk" appears when the optional PostScript 3 module is installed.
NCP Delivery Protocol
Select the protocol NCP delivery.
Interface Settings
1
29