Page 48 - Function Key Programming
Rely- - Relay Off
Switch the specified external output relay (1 or 2) off.
This function requires the relay switch (1 or 2) on the telephone system to be entered
when programmed. This function cannot be programmed through the phone by the
user.
Pressing
[User | Digital Telephony | Advanced | Relay | Relay Off]
Resum - Resume Call
Resume a call previously suspended into a specified ISDN exchange slot. This function
is not supported in the USA.
This function requires the exchange slot number to be specified when programmed.
The slot number is then shown next to
programmed through the phone by the user.
Pressing
slot. Suspended calls can be resumed by any extension.
[User | Digital Telephony | Advanced | Call | Resume Call]
See also:
•
•
Rtriv - Retrieve Call
Retrieve a call previously held into a specified ISDN central office slot and is only
supported if the central office provides a Q.931 hold facility. This function is not
supported in the USA.
This function requires the central office slot number to be specified when programmed.
The slot number is then shown next to
through the phone by the user.
Pressing
Held calls can only be retrieved by the extension that put the call on central office hold.
[User | Digital Telephony | Advanced | Call | Retrieve Call]
See also:
•
Ride - Ride Call
Unpark a parked call from a specified system park slot.
This function requires the park slot number to be specified when programmed. The slot
number is then shown next to
the phone by the user.
Pressing
slot by the same or another extension.
[User | Digital Telephony | Advanced | Call | Ride Call]
See also:
•
•
•
Page 48 - Function Keys
Function Key Programming
Relay switches the specified relay off.
Resum resumes any call previous suspended into the specified exchange
SusCW - Suspend CW on page 54.
Suspe - Suspend Call on page 54.
Rtriv retrieves any call previous held into the specified central office slot.
Hold - Hold Call on page 43.
Ride unparks any call previously parked into the specified system park
CPark - Call Park (!) on page 33
Park - Park (#) on page 46.
Park - Call Park to Other Extension (!) on page 46.
Resum. This function cannot be
Rtriv. This function cannot be programmed
Ride. This function cannot be programmed through
IP Office 2420 + EU24 User's Guide
40DHB0002UKEG – Issue 4 (9th February 2004)
Function Keys