Related Manuals for Avaya 201-type
Summary of Contents for Avaya 201-type
- Page 1 201-Type Module Recorder Interface User’s Guide 555-250-704 Issue 2 July 2006 © 2006 Avaya Inc. All Rights Reserved...
- Page 2 OBTAINING PRODUCTS To learn more about Avaya Inc. products and to order any of these products, access the Avaya web site at www.avaya.com. THE “CE” MARK If the “CE”...
-
Page 3: Switch Settings
Overview The 201-type Module Recorder Interface is an optional device that, when installed with the Avaya 2420 Digital Telephone, allows you to record telephone conversations. In addition, this module allows you to use the two headset jacks on the 20-type stand rather than a single headset jack directly connected to the 2420 telephone. - Page 4 If a recording device is connected to the 201-type module, you can record your telephone conversation by pressing the Record button on the device. Depending on the 201-type module switch setting, the caller may hear a “beep tone” when you are recording a conversation. This tone alerts the caller that the conversation is being recorded.
-
Page 5: Troubleshooting
Verify that the switches on the module are set correctly. For more information, refer to the 20-Type Stand, 200-Type Module Analog (U.S.) Adjunct Interface, and 201-Type Module Recorder Interface Installation and Safety Instructions (555-233-132). Check with your system manager to make certain that the 2420 telephone has been administered correctly. - Page 6 If the telephone is administered correctly but there is still not dial tone, remove power. Remove the module and refer to the 20-Type Stand, 200-Type Module Analog (U.S.) Adjunct Interface, and 201-Type Module Recorder Interface Installation and Safety Instructions (555-233-132). If the 2420 telephone, without the module, has dial tone, connect the module to another telephone.