Call Pickup (I6Xx) - Lucent Technologies MLS-model Programming And Use Manual

Call Pickup (I6XX)

Call Pickup (I6XX)
Description
This feature lets users answer any intercom, outside, or transferred call ringing at
another specified extension (where XX is a system extension number). This
feature is useful for officemates who agree to answer each other's calls.
Related Features
Use this feature to retrieve a parked call—see Call Park. Note that if you use Call
Pickup to answer a call that is parked at an extension that also has ringing calls,
you will be connected to the parked call—parked calls take precedence over
ringing calls.
Considerations
You can program a Call Pickup button on a system phone to pick up with one
touch a call that is ringing or parked at another specified extension.
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To program a Call Pickup button:
1. Press
10 or 11.
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button.
4. To specify the extension to be answered, press left
and the two-digit system extension number. For example, to answer a call
ringing at extension 23, press left
5. Program another button for this extension or exit programming mode.
Using
System Phone
1. If you want, lift the handset.
2. Press the programmed button, or press
number of the extension at which the call is ringing or parked.
e
and on system phones.)
f 0 0 s s c
i
i 6 2 3
.
i 6
and the two-digit
at extension
6
, followed by
5-57