Lucent Technologies MLS-model Programming And Use Manual page 282

Feature Reference
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To restrict an extension from making calls on a specific line:
1. Press
extension 10 or 11.
2. At the Extension: prompt, enter the extension number to be
programmed. For example, to program extension 23, press
3. At the Line: prompt, enter the line number to be restricted at this
extension. For example, to restrict line 2, press
The current restriction displays.
4. To change the line restriction for this extension, press
appropriate value displays—see "Valid Entries" on the previous page.
5. At this point:
6. Select another procedure or exit programming mode.
5-172
e
and on system phones.)
f 0 0 s s # 3 0 2
To restrict another line at this extension, press
until the line number shows on the display. Repeat Step 4.
To restrict another extension, press
begin at Step 2.
at
2 3
.
0 2
.
D
until the
n p
or
N P
and