Configuring Core Tree Protocol - Cisco XR12000 Series Configuration Manual

Implementing Multicast Routing on Cisco IOS XR Software
Command or Action
mpls 10.2.2.2
Step 6
Use the commit or end command.

Configuring Core Tree Protocol

SUMMARY STEPS
1. configure
2. multicast-routing
3. address-family {ipv4 | ipv6}
4. core-tree-protocol rsvp-te group-list name
5. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/0/CPU0:router# configure
Step 2 multicast-routing
Example:
RP/0/0/CPU0:router(config)# multicast-routing
OL-30405-02
Cisco IOS XR Multicast Configuration Guide for the Cisco XR12000 Series Router, Release 5.1.x
P2MP configurations at egress node and bud node
Purpose
commit—Saves the configuration changes, and remains
within the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without committing
the configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
Purpose
Enters global configuration mode.
Enters multicast routing configuration mode.
95