Manually Update The Service Tag; Installation; Rack Rails - Dell Precision 7920 Rack Owner's Manual

About this task
Below is a list of options available:
• Restore the service tag, license, and diagnostics information, press Y.
• Navigate to the Lifecycle Controller based restore options, press N.
• Restore data from a previously created Hardware Server Profile, press F10.
NOTE: When the restore process is complete, BIOS prompts to restore the system configuration
data.
• To restore the system configuration data, press Y.
• To use the default configuration settings, press N.
NOTE: After the restore process is complete, system reboots

Manually update the Service Tag

After replacing a system board, if Easy Restore fails, follow this process to manually enter the Service Tag, using System Setup.
About this task
If you know the system service tag, use the System Setup menu to enter the service tag.
1 Turn on the system.
2 To enter the System Setup, press F2.
3 Click Service Tag Settings.
4 Enter the service tag.
NOTE: You can enter the service tag only when the Service Tag field is empty. Ensure that you enter the correct
service tag. Once the service tag is entered, it cannot be updated or changed.
5 Click OK.

Installation

Installing the Precision 7920 Rack requires information about the following topics:
•

Rack Rails

• System Initialization
• Basic Configuration
Rack Rails
The rail offerings consist of two types of rails — sliding and static.
The sliding rails allow the system to be fully extended out of the rack for service. They are available with or without the optional cable
management arm (CMA).
Removing and installing components 69