Initialization - Dell Precision 7920 Rack Owner's Manual

Figure 31. Slide system into the rack

Initialization

After you receive your system, you must set up your system, install the operating system, and set up and configure the system iDRAC IP
address for system management.
Setting up your system
• Unpack the system.
• If applicable, install the system into the rack.
• Connect any peripherals to the system.
• Connect the system to its electrical outlet.
• Turn on the system by pressing the power button.
• Turn on the attached peripherals.
Methods of setting up and configuring the iDRAC IP address
You can set up the Integrated Dell Remote Access Controller (iDRAC) IP address by using one of the following interfaces:
1 iDRAC Settings utility
2 Lifecycle Controller
Removing and installing components 79