System Cover - Dell Precision 7920 Rack Owner's Manual

System cover

Removing system cover
Prerequisites
1 Turn off the system, including any attached peripherals.
2 Disconnect the system from the electrical outlet and disconnect the peripherals.
Steps
1 Using a flat head screwdriver, rotate the latch release lock counter clockwise to the unlocked position.
2 Lift the latch till the system cover slides back and the tabs on the system cover disengage from the slots on the system.
3 Hold the cover on both sides, and lift the cover away from the system.
Installing system cover
Prerequisite
1 Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system.
Steps
1 Align the tabs on the system cover with the slots on the system.
2 Push the system cover latch down.
3 Using a flat head screwdriver, rotate the latch release lock clockwise to the locked position.
Next steps
1 Reconnect the peripherals and connect the system to the electrical outlet.
Removing and installing components 31