Table of Contents
Advertisement
● To use the default configuration settings, press N.
NOTE:
After the restore process is complete, system reboots
Manually update the Service Tag
After replacing a system board, if Easy Restore fails, follow this process to manually enter the Service Tag, using System
Setup.
About this task
If you know the system service tag, use the System Setup menu to enter the service tag.
1. Turn on the system.
2. To enter the System Setup, press F2.
3. Click Service Tag Settings.
4. Enter the service tag.
NOTE:
You can enter the service tag only when the Service Tag field is empty. Ensure that you enter the correct
service tag. Once the service tag is entered, it cannot be updated or changed.
5. Click OK.
Installation
Installing the Precision 7920 Rack requires information about the following topics:
● Rack Rails
● System Initialization
● Basic Configuration
Rack Rails
The rail offerings consist of two types of rails — sliding and static.
The sliding rails allow the system to be fully extended out of the rack for service. They are available with or without the optional
cable management arm (CMA).
The static rails support a wider variety of racks than the sliding rails. However, they do not support serviceability in the rack and
are thus not compatible with the CMA.
Disassembly and reassembly
89
Advertisement
Table of Contents
