Table of Contents
Advertisement
User Guide for the Polycom CX300 Desktop Phone
Note
Changing the Phone Settings
Note
Warning
1 - 8
If you want ringing and other sounds made by your computer to
c
output from the Polycom CX300 earpiece, select the Polycom CX300 to
be the device for the Sounds setup page. Otherwise ensure that your
PC sound output device is selected.
Click Finish to exit the wizard.
d
Contact your system administrator to ensure your account is configured for
Enterprise Voice mode.
You can modify the volume and text display settings of your phone. These
settings can be accessed while 5=settings is displayed on the splash screen,
which is displayed on the phone at startup. 5=settings is displayed for 10
seconds.
If the language setting of Microsoft Lync 2010 is not English, the 5=settings is not
displayed with the splash screen. However, you can still access the phone settings
if you press the 5 dial pad key during the first 10 seconds of the splash screen's
display.
Press the * dial pad key to return to a previous menu or exit phone settings
menu.
Do not disconnect the phone from the computer that is running Microsoft Lync 2010
when making changes to the phone settings. This could result in data corruption.
This section contains instructions for:
•
Volume Key Response Rate
•
Call Volume Setting
•
Text Size Setting
Volume Key Response Rate
The volume key response rate sets how fast the volume changes after the
user's key press and how fast the phone's volume increases or decreases in
response to a user's key press.
Advertisement
Table of Contents
