Restoring The Factory Settings (Factory Reset) - Boss AD-10 Owner's Manual

In the state of step 1, you can press each effect button to switch
it between blinking and lit.
Status Explanation
Lit
Switch according to each MEMORY.
Blink
Always use the knob positions.
Restoring the Factory Settings
(Factory Reset)
Here's how to return the AD-10 to its factory-set state.
1 While holding down the NOTCH [1] and [2] buttons,
turn the power on.
" Fr " appears in the display, and the [MEMORY] button blinks.
* If you decide to cancel the factory reset, turn off the power.
2 Press the [MEMORY] button.
The display flashes and the factory reset is executed.
* Never turn off the power while Factory Reset is in progress.
3 Once " " appears in the display, you can turn off
the power.
Advanced Settings
13