Connecting A Footswitch Or An Expression Pedal; Turning On/Off The Power - Boss AD-10 Owner's Manual

Connecting a Footswitch or an Expression Pedal

If you connect a footswitch (FS-5U, FS-6, FS-7: sold separately) or expression pedal (FV-500H, FV-500L, EV-30, Roland EV-5: sold separately)
to the CTL1,2/EXP jack, you'll be able to assign a variety of functions to it. "Assigning the Functions of the Pedals" (p. 12)
* Use only the specified expression pedal. By connecting any other expression pedals, you risk causing malfunction and/or
damage to the unit.

Turning On/Off the Power

Before you make connections, make sure that the input gain or volume of your mixer or amplifier is turned down.
By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
* Before turning the unit on/off, always be sure to turn the volume down. Even with the volume turned down, you might hear
some sound when switching the unit on/off. However, this is normal and does not indicate a malfunction.
* When the batteries run low, the display indicates " Bt " When this occurs, install fresh batteries.
1/4" phone type Stereo 1/4" phone type
10 10
1/4" phone type 1/4" phone type x 2
FS-5U
FS-5U
Getting Ready
Stereo 1/4" phone type
10
Stereo 1/4" phone
FS-6
FS-7
EV-30, EV-5
3