Advanced Settings; Output Setting; Ambience Output Settings - Boss AD-10 Owner's Manual

Advanced Settings

Output Setting

Here's how to set the output level of the XLR OUT (L, R) jacks
and LINE OUT (L/PHONES, R/MONO) jacks, and how to specify
the way in which ambience (p. 7) is output.
1 Press the [MENU] button.
The AD-10 is in output setting mode.
2 Press the [MEMORY] button to select a parameter .
Each time you press the button, the setting changes as follows.
" PL " (PHONES LEVEL) 0 " XL " (XLR LEVEL) 0 " LL "
(LOOP LEVEL) 0 " LP " (LOOP ACTION) 0 " XS " (XLR) 0
" LS " (LINE) 0 " 2b " (GUITAR INPUT 2 FX BYPAS)
MEMO
To return to the previous parameter, hold down the [EXIT]
button and press the [MEMORY] button.
3 Use the [ ? ] [ = ] buttons to select a value.
Parameter Value
Sets the volume of the PHONES jack.
PL
0 – gg ,
(PHONES LEVEL)
Ln (OUTPUT
LEVEL)
Specifies the volume of the XLR jacks.
XL
0 – gg ,
(XLR LEVEL)
Ln (OUTPUT
LEVEL)
LL
0 – gg
(LOOP LEVEL)
Specifies the switching order of the Looper.
rP
LP
(REC 0 PLAY)
(LOOP ACTION)
rd
(REC 0 DUB)
10
Explanation
If this is set to OUTPUT LEVEL,
the level corresponds to the
knob position
0–99 is a fixed value
(Default: OUTPUT LEVEL)
If this is set to OUTPUT LEVEL,
the level corresponds to the
knob position
0–99 is a fixed value
(Default: OUTPUT LEVEL)
Specifies the playback level of
the looper.
REC 0 PLAY 0 DUB (default)
REC 0 DUB 0 PLAY
Parameter Value
Selects the sound that is output from the XLR
and LINE jacks.
NX (MIX)
XS (XLR),
LS (LINE)
PP (PRE/POST)
CH
2B
oF , on
(GUITAR INPUT
2 FX BYPASS)

Ambience Output Settings

Here's how to specify the way in which ambience is output. It
can be output to both XLR OUT and LINE OUT, or to either XLR
OUT or LINE OUT.
1 Press the [AMBIENCE OUT] button to specify the
output method.
Each time you press the button, the setting alternates between
XLR+LINE, XLR only, LINE only, and both off. The indicators light
to indicate the jacks from which the ambience is output.
MEMO
When you press the [AMBIENCE OUT] button, the display shows
the ambience level of the entire AD-10. Use the [ ? ] [ = ] buttons
to specify the level.
This is convenient when you want to make a fine adjustment
to the amount of ambience, for example to compensate for the
acoustics of the venue in which you're performing.
Explanation
The sound processed by the
effects is output.
The USB AUDIO playback
sound is also mixed and
output.
L: The sound before effects
are applied (the output of the
input selector) is output.
R: The sound with effects
applied is output.
L: The sound of GUITAR IN 2
is output.
R: The sound of GUITAR IN 1
is output.
Specifies whether the sound
being input from GUITAR
INPUT 2 is processed through
the effects or bypasses the
effects.
If this is on, the effects are
bypassed; only the looper and
ambience effects are applied.
Instead of a guitar, you could
connect a different instrument
to GUITAR IN 2, letting you
perform with layered loops.