Restoring the Factory Settings
Here's how to restore the settings of the to their factory-set condition (factory reset).
MEMO
You can use the CUBE STREET II Editor to back up the settings stored on this unit to your mobile device.
To save the settings, back up with the CUBE STREET II Editor.
1.
While holding down the [STOP] button, turn the power on.
The REC 0 PLAY indicators repeatedly blink in sequence. When the blinking stops, all of this unit's settings return to the factory-set state.
NOTE
Don't turn off the power while the factory reset is in progress.
Note when using an already-paired iOS device
After executing a factory reset, you'll need to do the following.
CUBE-ST2 MIDI
For details, refer to the owner's manual of your iOS device.
Block Diagram
10
1
Disconnect "CUBE-ST2 MIDI."
CUBE-ST2 MIDI
2
Turn off.