Assigning The Functions Of The Pedals; Other Functions - Boss AD-10 Owner's Manual

Advanced Settings

Assigning the Functions of the Pedals

You can specify the function of each of the AD-10's pedals, and
of a footswitch or expression pedal connected to the CTL1, 2/
EXP jack.
& "Connecting a Footswitch or an Expression Pedal" (p. 3)
1 Hold down the [EXIT] button and press the [BOOST]
pedal.
The [MEMORY] button is lit red, and the [BOOST] pedal is lit
purple.
2 Press the [MEMORY] button to select the parameter
that you want to edit.
3 Use the [ ? ] [ = ] buttons to select a value.
4 Press the [EXIT] button to exit setting mode.
Parameter
EF (Exp Function)
1F (CTL1 Function),
2F (CTL2 Function),
BF (BOOST Pdl Function),
dF (DELAY Pdl Function),
tF (TUNER & MUTE Pdl
Function)

Other Functions

1 Hold down the [EXIT] button and press the [DELAY]
pedal.
The [MEMORY] button is lit red, and the [DELAY] pedal is lit
purple.
2 Press the [MEMORY] button to select a parameter
(refer to table).
MEMO
To return to the previous parameter, hold down the [EXIT]
button and press the [MEMORY] button.
3 Use the [ ? ] [ = ] buttons to select a value.
4 Press the [EXIT] button to exit settings mode.
12
Value Explanation
OUTPUT LEVEL
ov
AMBIENCE LEVEL
AN
LOOP LEVEL
LP
MEMORY/MANUAL
NN
TUNER & MUTE ON/OFF
Tv
TUNER & MUTE ON/OFF
TA
(HOLD:ANTI-FB SCAN)
ANTI-FB SCAN
(HOLD:TUNER&MUTE ON/
AT
OFF)
FX ON/OFF
FX
TapTempo
TT
InSelect
in
LOOP REC/PLAY/DUB
(PRESS TWICE: STOP, HOLD:
LP
CLEAR)
LOOP STOP
LS
(HOLD: CLEAR)
LOOP CLEAR
LC
ANTI-FB SCAN
AS
(HOLD: CLEAR)
MEMORY = (CTL1: default)
Ni
MEMORY ? (CTL2: default)
Nd
Parameter Value
USB monitor setting
Switches the output of the AD-10 sound to the
XLR and LINE jacks.
* You must install the USB driver when
connecting the AD-10 to your computer.
Download the USB driver from the BOSS
website. For details, refer to Readme.htm
which is included in the download.
& https://www boss info/support/
vd (USB direct
out)
of
on
vi (USB INPUT
0 – 55 – gg Input level of USB AUDIO
LEVEL)
vo (USB
0 – 55 – gg Output level of USB AUDIO
OUTPUT LEVEL)
Auto Off Setting
With the factory settings, the AD-10 will
automatically be switched off 10 hours after you
stop playing or operating the unit.
* If you don't want the unit to turn off
automatically, change this setting to " oF "
Ao (Auto Off)
(OFF).
of
on
STARTUP MODE
Selects the mode at power-on.
1
SN (STARTUP
MODE)
2
3
Memory settings for each effect
For each effect, you can specify whether its settings are
switched according to the selected MEMORY, or always use
settings that correspond to the position of its knobs (MANUAL).
For example, you can specify that the input/output settings and
EQ always use the same settings, but delay and ambience will
be switched as you select a different memory.
Explanation
The sound of the AD-10 is not
output from the XLR and LINE jacks;
it is output only to the computer
(USB).
Use this when you want to use your
DAW to apply a plug-in effect to the
sound of the AD-10, and output the
result from the output jacks.
The sound of the AD-10 is output to
the XLR and LINE jacks (default).
The power will not turn off
automatically.
The power will automatically turn off
after 10 hours. (default)
MANUAL MODE (default)
MEMORY MODE
MEMORY STOMP MODE