Table of Contents
Advertisement
Operating the TD 200
Entering the Parameter Block Address
The Setup Menu allows you to designate a V memory location where the parameter block (or
an offset to the location of the parameter block) is stored in the CPU. The default parameter
block address is V0. You can enter any V memory address up to V999.
Use the following procedure to enter the V memory address of the parameter block (or the
location of the offset to the parameter block):
Key
1.
ESC
2.
3.
4.
ENTER
5.
ENTER
Note
Pressing ESC at any time while entering the address of the parameter block aborts the edit
and returns the cursor to the left-most character of the line.
3-18
Action
The TD 200 enters the Menu mode.
The TD 200 scrolls down the menu options
five times.
The TD 200 scrolls down the Setup Menu
to the parameter block address option.
Press
to move the cursor to the
ENTER
address field. Use the up or down arrow
keys to display the correct address.
Press
to store the V memory address
ENTER
of the parameter block.
Display
MENU MODE:
VIEW MESSAGES
SETUP MENU:
TD 200 ADDRESS
1
SETUP MENU:
PARM ADDRESS
0
SETUP MENU:
PARM ADDRESS
0
SETUP MENU:
PARM ADDRESS
30
SIMATIC TD 200 Operator Interface
C79000-G7076-C205-04
Advertisement
Table of Contents
