Table of Contents
Advertisement
Product Overview and Installation
The Text Display 200 (TD 200) is a text display and operator interface for the S7-200 family
of programmable logic controllers. This manual uses the terms programmable logic controller
and S7-200 CPU (or CPU) interchangeably.
The following is a list of TD 200 features:
Displays messages read from the S7-200 CPU.
Allows adjustment of designated program variables.
Provides ability to force/unforce I/O points.
Provides ability to set the time and date for CPUs that have real-time clocks.
The TD 200 receives its power either from the S7-200 CPU through the TD/CPU cable or
from a separate power supply.
The TD 200 functions as a point-to-point interface (PPI) master when it is connected to one
or more S7-200 CPUs. The TD 200 is also designed to operate with any other PPI master in
a network. Multiple TD 200s can be used with one or more S7-200 CPUs connected to the
same network.
This manual provides you with hardware configuration directions and programming
examples that require additional equipment. The following is a list of additional equipment
that is necessary to set up and use your TD 200:
S7-200 series programmable logic controller
S7-200 programming device
Programming cable appropriate for your programming device
Chapter Overview
Section
1.1
Hardware Features
1.2
Installing the TD 200
1.3
Connecting the Communication Cable
1.4
Connecting a Power Cable
SIMATIC TD 200 Operator Interface
C79000-G7076-C205-04
Description
1
Page
1-2
1-4
1-6
1-7
1-1
Advertisement
Table of Contents
