Table of Contents
Advertisement
Configuring the TD 200
For this example, type in the text shown in Figure 2-9. This example message has two
embedded data values, one in the top line and one in the second line. The data value in the
top line is an integer. The data value in the second line is a real number.
A word value requires two characters for the value plus two more characters for format
information. Place the cursor at the character position shown in Figure 2-9 (four spaces from
the right). Click on the "Embedded Data..." button to bring up the Embedded Data dialog box.
TD 200 Configuration Wizard
Place cursor at the
correct position and
click "Embedded
Data..."
Figure 2-9
Wizard: Embedding Variable Data Value in a Message
2-10
You have asked to configure 3 message(s). Define your message by
placing your highest priority message first.
Message 2 of 3
5
P R E V
.
S E T P O I
25
N E W
S E T P O I
Message beginning address:
INS
Embedded Data...
<Previous Message
10
15
N T
:
30
35
N T
:
VB80
Message enabled bit:
V12.6
Next Message >
< Prev
Cancel
Finish
SIMATIC TD 200 Operator Interface
C79000-G7076-C205-04
20
40
Advertisement
Table of Contents
