4.7
Format of the Slave Parameter Data
Definition
This section describes the format of the slave parameter data as obtained by the
DP_read_slv_par call described in Section 4.1.11. There are three variants
possible that are selected by the value of the "type" parameter in the
DP_read_slv_par call:
General slave parameters
Parameter assignment data
Configuration data
The structure of the three variants is described below in greater detail.
DP Base Programming Interface for CP 5613/CP 5614
C79000-G8976-C108-02
Description of the DP Functions, Data, and Error Codes
Variant
Value of the "type" Parameter
DP_SLV_TYP
DP_SLV_PRM
DP_SLV_CFG
203