Attaching Top Joiner Bracket And Alcove Fixing Bracket To Alcove - Fisher & Paykel ACTIVESMART Dual Installation Manual

7
Use M5 x 12 Socket head cap screws to connect the top joiner bracket to the alcove
1
fixing bracket.
– For 80" (2032mm) installation, use the upper slots of the alcove fixing bracket (refer to A).
– For 84" (2134mm) installation, use the lower slots of the alcove fixing bracket (refer to B).
A
B
Measure the width of your alcove. Mark a line in the centre of the cavity, on the ceiling.
2
84" (2134mm)

ATTACHING TOP JOINER BRACKET AND ALCOVE FIXING BRACKET TO ALCOVE

72" (1829mm)
SCALE 1:10
For flush installation measure 1 1/4" (108mm) back from the front face of the adjacent
3
cabinetry doors (refer to C).
– Face 1 should be 4 1/4" (108mm) back.
– Face 2 should be lined up with the centre of the alcove.
For proud installation, the joiner bracket should sit forward. Measure 1 1/4" (108mm) - x
back from the front face of the adjacent cabinetry doors (refer to C).
– Face 1 should be 1 1/4" (108mm) - x (x = distance the product sits proud).
– Face 2 should be lined up with the centre of the alcove.
Using #8 x 16 mush washer screws (4), align and fix the joiner bracket to the centre of the
alcove (refer to D). (Loosely fix the screws the centre of each slot to enable adjustment in
the joiner bracket).
WARNING!
Ensure anti tip brackets are fitted at this stage (refer to separate 'Installation guide'
booklet supplied with your refrigerator).
IMPORTANT!
Door panels must be fitted to doors at this stage (refer to separate 'Installation guide'
booklet supplied with your refrigerator).
WARNING!
Do not open doors.
4 1/4" (108mm) = flush installation
4 1/4" (108mm) - x = proud installation
x
At this stage, connect to water and electrical supply as per the 'Installation guide' booklet
supplied with your refrigerator.
WARNING!
Failure to follow the instructions can lead to serious injury or death.
C
D
Face 1
Face 2
7