Attaching The Centre Trim And Toe Kick - Fisher & Paykel ACTIVESMART Dual Installation Manual

IMPORTANT!
Open both refrigerator doors.
Bring the centre trim in front of the
1
gap between the two refrigerators
(refer to A).
A
Starting from the upper spring clips, squeeze the clips to
2
slot between the two refrigerators (refer to B).
Repeat on the middle and then the lower clips.
3
Using the palm of your hand, push trim all the way down
4
the length of the refrigerator.
Screw the M8 set screw into the threaded hole of the
5
bottom joiner bracket to support the middle trim. This
maintains the height position of the trim. Once you are
satisfied with the location of the middle trim, use the M8
nut to lock the set screw into location (refer to C).
!1

ATTACHING THE CENTRE TRIM AND TOE KICK

B
C
Installing toe kick
6
Unscrew the toe kick bracket screws mid-way, and bring forward (refer to D and E).
Repeat this process for both refrigerators.
D
E
Place toe kick over the brackets and position
7
the outer brackets until flush with surrounding
cabinetry. Use the folded edge of the supplied
toe kick or another suitable straight edge to
align the inner brackets. Once aligned, remove
the toe kick.
Tighten the toe kick bracket screws to lock brackets into position and remove the backing
8
from the Velcro strip (refer to F). Attach the toe kick to the adhesive surfaces.
F
11