Location Of Products Into Alcove - Left Product - Fisher & Paykel ACTIVESMART Dual Installation Manual

IMPORTANT!
Open the door of the right hinge refrigerator.
Roll the left hinge refrigerator into the left hand side of the alcove until the refrigerator
1
makes contact with the joiner bracket (refer to A).
IMPORTANT!
For flush installation: check for flushness of the refrigerator with the adjacent refrigerator
(refer to separate 'Installation guide' booklet supplied with your refrigerator on how to
achieve flushness).
9 LOCATION OF PRODUCTS INTO ALCOVE — LEFT PRODUCT
A
Open the left hinge refrigerator door to access the brackets (refer to B).
2
Adjust the refrigerator height (as per the separate 'Installation guide' booklet supplied with
3
your refrigerator), so holes in the top trim are in line with the holes in the joiner bracket
(refer to C).
– Note: for clarity of drawing, top trims are not shown.
Screw two M5 x 12 Socket head cap screws to fix left hand top trim to the joiner bracket
4
(refer to C).
B
C
9