Ny-Series Instructions Reference Manual (W560 - Omron NY532-5400 Reference Manual

Definitions of Global Variables
Global Variables
Name
E001_NX_Unit_I_O_Data_Ac-
tive_Status_63
N1_Node_location_information
*1 On the Sysmac Studio, right-click an NX-series slave terminal unit, select Display Node Location Port, and
set the device variable. Refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504-E1-07 or
later) for details.
LD
Internal
Vari- Variable
ables
OperationEnd
Trigger
Operating
DevicePort
SendDat
SendSize
RS_instance
NX_Seri-
alSend_instance
SendCfg
StartTrig
StartCode
EndTrig
EndCode
Exter-
nal Vari-
ables
E001_NX_Unit_I_O_Data_Ac-
tive_Status_63
N1_Node_location_information _sNXUNIT_ID

NY-series Instructions Reference Manual (W560)

Data type
ARRAY[0..63] OF
BOOL
_sNXUNIT_ID
Data type
BOOL
BOOL
BOOL
_sDEVICE_PORT
ARRAY [0..5] OF BYTE
UINT
RS
NX_SerialSend
_sSERIAL_SEND_CFG
_eSERIAL_START
BYTE[2]
_eSERIAL_END
BYTE[2]
Variable Data type
ARRAY[0..63]
OF BOOL
2 Instruction Descriptions
AT
ECAT://node#1/NX Unit
Usage of I/O data for 63 NX
I/O Data Active Status
Units.
125
Device variable to specify
---
NX-CIF210
Initial value
FALSE
FALSE
FALSE
[6(16#0)]
0
_SERIAL_START_NONE
[2(16#0)]
_SERIAL_END_END-
CODE1
[16#0D,16#00]
Comment
• Usage of I/O data for 63 NX Units.
• If the relevant Unit number is 1, E001_NX-
_Unit_I_O_Data_Active_Status_63[1] is used.
Device variable to specify NX-CIF210
Comment
*1
2
Comment
Processing com-
pleted
Execution condition
Processing
Port settings
Send data
Send data size
Without start code
With end code
16#0D(CR)
2-1165