Overview Of Ny-Series Errors - Omron NY532-5400 Troubleshooting Manual

Hide thumbs Also See for NY532-5400:

Table of Contents

1 Overview of Errors

Overview of NY-series Errors

You manage all of the errors that occur on the NY-series Controller as events. The same methods are

used for all events. This allows you to see what errors have occurred and find corrections for them with

the same methods for the entire range of errors that is managed (i.e., NY-series Controller, NX-series

Slave Terminals, and EtherCAT slaves

*1 Only Sysmac devices are supported. For information on EtherCAT slaves that are Sysmac devices, refer to the

NY-series Industrial Panel PC / Industrial Box PC Built-in EtherCAT Port User's Manual (Cat. No. W562).

Network Status

Network Configurator

Troubleshooting

Sysmac Studio

Error management range for

NY-series Controller

You can use the troubleshooting functions of the Sysmac Studio or the Troubleshooter on an HMI to

quickly check for errors that have occurred and find corrections for them.

To perform troubleshooting from an HMI, connect the HMI to the built-in EtherNet/IP port on the NY-

series Industrial PC.

You can also use the Network Configurator to check the network status of EtherNet/IP. For the proce-

dure to check network status, refer to the methods of communications status check and troubleshooting

for the EtherNet/IP network described in the NY-series Industrial Panel PC / Industrial Box PC Built-in

EtherNet/IP Port User's Manual (Cat. No. W563).

Precautions for Correct Use

Refer to A-4 Applicable Range of the HMI Troubleshooter for the applicable range of the HMI

Troubleshooter.

Host computer

Built-in EtherCAT port

Built-in EtherNet/IP port

NY-series Troubleshooting Manual (W564)

Troubleshooter

Table of Contents