Ny-Series Instructions Reference Manual (W560 - Omron NY532-5400 Reference Manual

2 Instruction Descriptions
Bit strings
OK OK OK OK OK OK OK OK OK OK OK OK OK OK
RespSer-
viceDat
RespSize
*1 A CPU Unit with unit version 1.11 or later and Sysmac Studio version 1.15 or higher are required to specify _sRE-
QUEST_PATH_EX type.
Function
The CIPUCMMSend instruction sends command data ServiceDat for the service specified with service
code ServiceCode as a UCMM explicit message.
The destination is specified with route path RoutePath.
RqPath specifies the request path.
Size specifies the number of elements to send. If ServiceDat is an array, specify the number of ele-
ments to send with Size. If ServiceDat is not an array, always specify 1 for Size. If no service data is
required, set Size to 0.
The response data received later is stored in RespServiceDat. The number of bytes of the response
data is stored in RespSize.
TimeOut specifies the timeout time. If a response does not return within the timeout time, it is assumed
that communications failed.
The data type of RqPath is structure _sREQUEST_PATH or _sREQUEST_PATH_EX.
Normally, use _sREQUEST_PATH. When you want to specify the logical format size, use _sRE-
QUEST_PATH_EX. The specifications are as follows:
• _sREQUEST_PATH type
Name
RqPath
ClassID
InstanceID
isAttributeID
AttributeID
Note The logical format size of each ID in _sREQUEST_PATH type is 16 bits.
2-1036
An array, structure member, or union member can also be specified.
OK
Meaning Description
Request path Request path
Class ID Class ID
Instance ID Instance ID
Attribute TRUE:Attribute ID used.
usage
FALSE:Attribute ID not
used.
Attribute ID Attribute ID
Integers
Data type
_sRE-
QUEST_-
PATH
UINT
UINT
BOOL
UINT

NY-series Instructions Reference Manual (W560)

Times, durations, dates,
and text strings
Valid range Unit Default
--- --- ---
0
Depends on FALSE
---
data type.
0