Carrier Activation; Checking Battery Status; Replacing The Battery; Cables - Motorola MC65 User Manual

1 - 10 MC65 User Guide

Carrier Activation

Upon start up, the MC65 looks for an installed SIM card. If an active SIM card is detected the MC65 provisions
itself.
After installing the SIM card, activate your mobile service connection.
If the ES400 does not find an active SIM Card, an activation screen appears on the screen to activate on a CDMA
network.
Activation Screen
Figure 1-8
Tap Yes.
Call your carrier from an existing phone to request over-the-air activation. You need to provide the MEID number
from the screen.
NOTE If switching from one carrier to another, refer to the ES400 User Manual for detailed information.

Checking Battery Status

NOTE To check battery status, remove the MC65 from any AC power source (cradle, cables, etc.)
To check the charge status of the main battery in the MC65, tap Start > Settings > System tab > Power icon to
display the Power window.
To save battery power, tap the Advanced tab and set the MC65 to turn off after a specified number of minutes.

Replacing the Battery

Press the red Power button to suspend the MC65.
1.
Use finger or stylus to slide the battery latch to the right releasing the battery. The battery ejects slightly.
2.