Configuring Gvrp; Overview; Garp - HP 6600 Configuration Manual

Configuring GVRP

GVRP is supported on SAP modules that are operating in bridge mode.
The Generic Attribute Registration Protocol (GARP) provides a generic framework for routers in a
switched LAN, such as end stations and switches, to register and deregister attribute values. The GARP
VLAN Registration Protocol (GVRP) is a GARP application that registers and deregisters VLAN attributes.
GVRP uses the operating mechanism of GARP to maintain and propagate dynamic VLAN registration
information for GVRP routers on the network.

Overview

GARP

GARP provides a mechanism that allows participants in a GARP application to distribute, propagate,
and register—with other participants in a LAN—the attributes specific to the GARP application, such as
VLAN or multicast address attributes.
How GARP works
Each port that participates in a GARP application (GVRP, for example) is a GARP participant.
GARP enables GARP participants to propagate attribute values throughout the switched LAN. As shown
in Figure 44, a GARP participant registers and deregisters its attribute values with other GARP
participants by sending and withdrawing declarations, and registers and deregisters the attribute values
of other participants according to the declarations and withdrawals that it has received.
Figure 44 How GARP works
For example, a GVRP-enabled port registers and deregisters VLAN in the following cases.
When the port receives a VLAN attribute declaration, it registers the VLAN attribute and joins the
•
VLAN.
When the port receives a VLAN withdrawal, it deregisters the VLAN and leaves the VLAN.
•
GARP message types
A GARP participant exchanges information with other GARP participants by sending GARP messages.
As a GARP application, GVRP also uses GARP messages for information exchange. The GARP messages
can be of the following types.
130