Ring Tone; Custom Name; Call Timer - Aastra 6757i CT User Manual

Accessing Options on the Cordless Handset

Ring Tone

There are several selectable Ring tones available on the 6757i CT handset. A check mark beside the ring tone number
indicates the currently selected ring tone.
Reference
For more information about selecting a ring tone on the handset, see

Custom Name

Custom name allows the user to personalize the name/label for the cordless handset. In a multi-handset environment,
this is an ideal option to personalize each handset to its user or extension number.
Handset UI
Press Â.
1.
Navigate to Custom Name or press 4.
2.
3. Press the Change softkey.
4. Press the Edit softkey. If a custom name already exists, the Delete softkey is presented.
Using the keypad, type out a new label or use the scroll keys  and Ï to move the cursor to the desired display
5.
position or to erase text.
6. The ChCase softkey is available to toggle between upper and lower case text entry.
7. Press the Save softkey to save the name.
y
8. Press the Goodbye key to return to the main idle screen.
Note:
In editing mode, the Volume Bar can be used in place of the
Lower end volume bar for Backspace/Erase; and pressing the Higher end volume bar to add a Space.

Call timer

When the call timer is enabled, the timer starts from the first call and continues until all calls have been released.
Note:
The call timer is not usable for call accounting since the timer continues to increment even when the call is on hold.
Handset UI
172
Ring Tone 1
½
= Scroll
Cancel Select
"Ring Tones and Tone Sets"
 Ï
and keys to control the screen cursor. Pressing the
on page 24.
41-001384-00 Rev 01 – 06.2013