Additional Features
Switch UI Focus to Ringing Line
You can configure a feature on the 6757i CT that controls the behavior of the phone when it receives an incoming call
when it is already in a connected call. When a call comes into the phone, and the phone is already on a connected call,
the phone switches focus to the ringing line to enable the user to see who is calling them. You can turn off this function-
ality so that the phone stays focused on the connected call. You can do this using the Switch Focus to Ringing Line
parameter in the Aastra Web UI.
Configuring "Switch Focus to Ringing Line" Using the Aastra Web UI
Aastra Web UI
Use the following procedure to enable or disable the "Switch Focus to Ringing Line" using the Aastra Web UI.
Note:
"Switch Focus to Ringing Line" is enabled by default.
1.
Click on Basic Settings->Preferences->General.
2.
The "Switch Focus to Ringing Line" field is enabled by default. To disable this field, uncheck the box.
3.
Click Save Settings.
200
41-001384-00 Rev 01 – 06.2013