Optional) Enabling Flow Control; Optional) Enabling Auto-Negotiation Of Flow Control - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Ethernet

1.4.5 (Optional) Enabling Flow Control

Context
Do as follows on the S9300 where you need to enable flow control.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
Step 3 Run:
flow-control
Flow control is enabled on the Ethernet interface.
By default, flow control is disabled on an Ethernet interface.
To implement flow control, you must enable this function on both the local interface and peer
interface.
----End

1.4.6 (Optional) Enabling Auto-Negotiation of Flow Control

Context
Do as follows on the S9300 whose interface needs to be configured with auto-negotiation of
flow control.
GE interfaces support auto-negotiation of flow control, but FE interfaces do not support this
function.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface gigabitethernet interface-number
The GE interface view is displayed.
Step 3 Run:
flow-control negotiation
Auto-negotiation of flow control is enabled on the GE interface.
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Ethernet Interface Configuration
1-11