Battery Installation - Polaris Sportsman 9921309 Owner's Manual

Battery

Battery Installation

Using a new battery that has not been fully charged can damage the bat-
tery and result in a shorter life. It can also hinder vehicle performance.
Follow the battery charging instructions on page 107 before installing
the battery.
1. Ensure that the battery is fully charged.
2. Place the battery in the battery holder.
3. With conventional batteries, install the battery vent tube (sealed bat-
teries do not have a vent tube).
NOTE:
The vent tube must be free of obstructions and securely installed. If
not, battery gases could accumulate and cause an explosion. The
tube should be routed away from the frame and body to prevent corro-
sion. Avoid skin contact with electrolyte, which can cause severe
burns.
4. Connect and tighten the red (positive) cable first.
5. Connect and tighten the black (negative) cable last.
6. Install the battery cover.
7. Secure the battery hold-down strap.
8. Verify that cables are properly routed.
MAINTENANCE
105