Table of Contents
Advertisement
MAINTENANCE
BATTERY INSTALLATION
Using a new battery that has not been fully charged can damage the battery
and result in a shorter life. It can also hinder vehicle performance. Refer to the
battery charging information in the Maintenance chapter before installing the
To reduce the chance of sparks when installing the battery, always install the
1. Clean battery cables and terminals with a stiff wire brush. Corrosion can be
removed using a solution of one cup water and one tablespoon baking soda.
Rinse well with clean water and dry thoroughly.
2. Carefully install the battery into the vehicle.
3. Coat terminals and bolt threads with Nyogel® Grease.
4. Connect the positive (+) red cable as shown below. Torque to specification.
q
Flange Bolt
w
Battery Cable
e
Internal Tooth Lock Washer
r
Flat Washer
t
Flange Nut (Torque Applied)
5. Install positive battery boot.
6. Connect and tighten the negative (-) black cable. Torque to specification.
7. Verify the battery cables are properly routed.
160
NOTICE
battery.
CAUTION
negative (-) cable last.
TORQUE
Battery Terminals
62 in-lbs (7 N·m)
Advertisement
Table of Contents
