Side Panel Removal; Steering Assembly - Polaris Sportsman 9921309 Owner's Manual

Steering Assembly

The steering assembly of the ATV should be checked periodically for
loose nuts and bolts. If loose nuts and bolts are found, see your Polaris
dealer for service before operating the vehicle.

Side Panel Removal

1. Remove the seat.
2. Grasp the rear of the side
panel near the rear cab. With
a quick and firm motion, pull
the panel forward and out-
ward to disengage the two
rear tabs.
3. Place your hand on top of the
side panel behind the fuel
tank. With a quick and firm
motion, push down on the
side panel to disengage the
top rear two tabs. Then pull
up on side panel to disengage
front upper and lower tabs.
4. To reinstall the side panel,
align the panel tabs with the
slots on the front cab. Push
the panel upward and for-
ward until the tabs lock.
Bend the rear of the side
panel and insert the two tabs
into the rear cab.
MAINTENANCE
Step 2
Step 3
Step 4
87