Separation Of Differential Assembly And Clutch Housing; Disassembly Of Gearshift Fork Mechanism - Chery QQ6 Service Manual

7. Separation of differential assembly and clutch housing

Separate differential assembly and clutch housing, and then simply take out the differential assembly as
shown in Figure 7.

8. Disassembly of gearshift fork mechanism

Use a hammer and a special tool to knock off all spring pins and then use a snap ring pliers or other
special tool to take the split washer off the fork shaft (when taking off the split washer, prevent it from
deformation), and then disassemble each part of the gearshift mechanism.
Differential Assembly
Figure 7
Split washer
12
Spring pin