Intermec PB50 User Manual page 47

PB50 Portable Label Printer User's Guide
Chapter 3 — Troubleshooting and Maintaining the PB50
Possible PB50 Error Icons and Messages
Error Icon Error Message Description
Pause
Paper out
Test feed not
done
Printhead hot
'
Upgrading
LSS too high,
LSS too low
IP configuration
error
IP link error
Field out of label You are attempting to print in an area
The printer is paused.
The printer is out of paper. Load a
new roll of media. For help, see
"Loading Media" on page
The printer did not perform a test
feed before it printed out test labels.
It is important to perform a test feed
because it calibrates the sensor. Press
the Feed button to perform a test
feed.
The printhead is overheated and
needs to cool down. Wait for printing
to resume automatically.
The printer is loading new firmware.
These errors can occur when you run
a test feed without any media
installed, or if you have incorrect
media settings.
Load the printer with media (see
"Loading Media" on page
Test mode (see "Using Test Mode"
on page 19), and select the
appropriate media type.
The printer is trying to acquire an IP
address from the network. Wait for
the printer to complete the task
before taking any action.
????
that extends beyond the print
window. See the programmer's
reference manual for your type of
firmware (IPL or Fingerprint) for
information on how to set the media
parameters.
9.
9), run
39