Connecting The Line And Motor Cable At The Inverter; Connection Overview - Siemens SINAMICS G12 Hardware Installation Manual

5.2

Connecting the line and motor cable at the inverter

5.2.1

Connection overview

Note
Line reactor
A line reactor is not required for the Power Modules FSD ... FSF.
Line filter
The inverters are available with or without integrated line filter (Class A). For frame sizes
FSA ... FSC, 3 AC 400 V, there are external filters (Class B) for increased EMC requirements.
Output reactor
For frame sizes FSD ... FSF no output reactor is required in many cases on account of the
long cable lengths between the inverter and the motor.
Available output reactors:
Braking resistor
Connect the braking resistor to the inverter via the R1 and R2 terminals.
Figure 5-2
Power Module PM240-2
Hardware Installation Manual, 08/2017, A5E33294624B AG
Line filter (Page 129)
Output reactor (Page 141)
Block diagram of the inverter, FSA ... FSC
5.2 Connecting the line and motor cable at the inverter
Connecting-up
55