Accessories
9.7 Connecting a motor holding brake
9.7.3
Mounting and connecting the brake relay
Installing the Brake Relay
● FSA ... FSC: Install the Brake Relay next to the Power Module.
● FSD ... FSF: Install the Brake Relay at the rear of the lower shield plate. Attach the Brake
Relay before you install the shield plate.
Connecting the Brake Relay to the inverter
The connector for the Brake Relay is located at the front of the Power Module. Lay the cable
harness for the Brake Relay in the cable routing.
140
AUTOHOTSPOT
Hardware Installation Manual, 08/2017, A5E33294624B AG
Power Module PM240-2